JGA1T802W-G/D1/P Latch-Up Gigabit RJ45 Connector with EMI Fingers
JGA1T802W-G/D1/P Latch-Up Gigabit RJ45 Connector with EMI Fingers

JGA1T802W-G/D1/P Latch-Up Gigabit RJ45 Connector with EMI Fingers

130008-02011


A 1x1 magnetic RJ45 connector with integrated Ethernet magnetics, a side-entry latch-up layout, and through-hole mounting. Its wide operating temperature range and EMI fingers support designs that need a shielded Gigabit interface with front-panel access.


√ 10/100/1000BASE-T Ethernet

√ Side Entry, Latch Up

√ -40°C to +85°C Operation

√ EMI Fingers and Metal Shielding

√ Green / Green-Yellow LED Configuration

√ 25.4 × 16.2 × 13.45 mm Body


*Share your PCB layout and application requirements for model selection support.


JGA1T802W-G/D1/P Magnetic RJ45 Connector Overview

Integrated Ethernet Magnetics in a Shielded, Latch-Up Interface

Product Overview

GLGNET JGA1T802W-G/D1/P is a single-port Gigabit Ethernet jack with a side-entry, latch-up layout. It combines the cable interface and Ethernet magnetic components in one through-hole assembly.

This model brings together a wide operating temperature range, EMI fingers, and a Green / Green-Yellow LED configuration. Its mechanical drawing includes the PCB footprint and recommended panel opening for equipment integration.

01

RJ45 with Integrated Magnetics

This RJ45 magjack integrates Ethernet transformer circuitry into the connector body, reducing the need for separate magnetic components beside the port.

02

Side-Entry, Latch-Up Layout

The cable enters parallel to the PCB, with the plug latch facing upward. This orientation suits board-edge interfaces with access above the latch.

03

Defined Mechanical Envelope

The connector body measures 25.4 × 16.2 × 13.45 mm. Use these dimensions together with the drawing when planning board-edge placement and enclosure space.

04

PCB and Panel Drawing Support

The model drawing provides the mounting footprint, panel cutout, and magnetic circuit, helping engineers check mechanical fit and electrical connections before sample evaluation.

Need a Customized RJ45 Connector Solution? Send your drawing, panel constraints, and Ethernet requirements to discuss a suitable connector configuration.

JGA1T802W-G/D1/P Magnetic RJ45 Connector Specifications

Review the standard model's interface, mechanical dimensions, LED configuration, and operating limits. Use the datasheet for PCB layout and circuit verification.

ParameterSpecificationParameterSpecification
ModelJGA1T802W-G/D1/PData Rate10/100/1000BASE-T
Part Number130008-02011PoE SupportNone (Non-PoE)
Port Configuration1x1 (Single Port)LED ConfigurationGreen / Green-Yellow
Number of RJ45 Contacts8ShieldingShielded
Connector TypeRJ45 with Integrated MagneticsEMI Finger / GasketEMI Fingers
Connector StyleSide Entry, Latch UpLength25.4 mm
Mounting TypeThrough HoleWidth16.2 mm
Height13.45 mmOperating Temperature-40°C to +85°C

Need More Technical Information?

Download the drawing for PCB and panel dimensions, magnetics schematic, and electrical parameters. Contact GLGNET to confirm your application requirements.

Request Datasheet→

Quality Certification

We holds multiple international certifications, ensuring that its China RJ45 connectors and cages meet strict standards for quality, reliability, safety, and environmental compliance.Key certifications include: ISO 9001, IATF 16949, QC 080000, ROHS, REACH, UL, ELCC,etc.

IATF 16949

QC 080000

REACH

ROHS

UL

ELCC

Advantages of JGA1T802W-G/D1/P Magnetic RJ45 Connector

A -40°C to +85°C operating range, EMI fingers, green and dual-color LEDs, and defined wave-soldering limits support Ethernet interface design and PCB assembly planning.

Wide operating temperature range of magnetic RJ45 connector
Wide Operating Temperature Range
With a specified operating range of -40°C to +85°C, this gigabit RJ45 connector offers a wide temperature window for equipment interface design. It can be evaluated for industrial gateway and controller projects whose connector requirements fall within this range.
EMI fingers at the panel interface of magnetic RJ45 connector
EMI Fingers at the Panel Interface
The metal shield and EMI fingers provide contact points for the equipment's shielding design. The final EMC result depends on panel contact, grounding, PCB layout, and system validation.
Green and dual-color LED indicators on magnetic RJ45 connector
Green and Dual-Color LED Indicators
One green LED and one green/yellow dual-color LED provide visual indication options at the Ethernet port. Equipment designers assign their link or activity functions through the LED control circuit.
Through-hole wave soldering assembly for magnetic RJ45 connector
Through-Hole Wave-Soldering Assembly
The drawing recommends wave soldering for this through-hole part, with a peak soldering temperature of 260°C maximum for 10 seconds maximum. These defined limits support PCB assembly process evaluation for the selected connector.
Share Your Requirements with GLGNET

Applications of JGA1T802W-G/D1/P Magnetic RJ45 Connector

Evaluate this model for non-PoE Gigabit equipment that requires a shielded side-entry interface. Application suitability depends on the board, panel, and complete system requirements.

magnetic RJ45 connector for industrial gateways and controllers

Industrial Gateways & Controllers

Suitable for evaluation in gateway and controller interfaces that require an industrial RJ45 connector with a -40°C to +85°C operating range. The EMI fingers provide contact points for a suitably designed shielded panel.

magnetic RJ45 connector for Ethernet switches and routers

Ethernet Switches & Routers

Suitable for an individual copper Ethernet port where latch-up cable access, LED visibility, and shield contact with the panel are part of the equipment layout.

magnetic RJ45 connector for embedded networking systems

Embedded Networking Systems

Provides a board-mounted gigabit RJ45 connector for embedded communication boards. Check the 25.4 mm body length and recommended footprint when planning the PCB edge.

magnetic RJ45 connector for security and monitoring equipment

Security & Monitoring Equipment

Can be evaluated for data ports on separately powered monitoring devices or controllers. This standard model is non-PoE, so projects requiring power over Ethernet need a different connector selection.

Request a Quote

Custom RJ45 Connector

Mechanical interface customization, magnetics and LED engineering, and OEM/ODM manufacturing support help move approved connector designs from sample evaluation to volume production.

GLGNET custom magnetic RJ45 connector solutions.webp

Customized Magnetic RJ45 Solutions from GLGNET

As an RJ45 connector manufacturer, GLGNET helps OEMs match Ethernet interfaces to mechanical layouts and electrical requirements. Engineering and manufacturing support covers connector selection, sample evaluation, and production planning.

01

Mechanical & Interface Customization

Discuss PCB footprints, panel cutouts, latch access, and shield-contact requirements with GLGNET. Proposed changes are developed against the project's mechanical requirements and documented in a separate configuration drawing.

02

Electrical & LED Engineering Support

GLGNET's engineering capabilities include signal-integrity analysis and testing. The team can evaluate magnetics, PHY interface, and LED requirements with the customer, with the validation scope agreed for each project.

03

OEM & ODM Manufacturing Support

Support extends from sample verification to volume manufacturing. Confirm the approved configuration, order quantity, and delivery requirements with GLGNET. Custom specifications are evaluated separately from standard part number 130008-02011.

Contact GLGNET

JGA1T802W-G/D1/P Magnetic RJ45 Connector FAQs

Can I request samples of JGA1T802W-G/D1/P before a bulk order?

Yes. Contact GLGNET for samples to evaluate board fit, panel clearance, and electrical compatibility. Specify part number 130008-02011 and the required sample quantity. Confirm availability and sample arrangements with the sales team.

What information should I provide for a quotation?

Provide the model or part number, order quantity, target delivery date, and application. Include your PCB footprint, PHY interface, temperature requirement, and any LED or shielding requirements that affect selection.

Can GLGNET provide OEM or ODM magnetic RJ45 connectors?

Yes. GLGNET can evaluate custom mechanical and electrical requirements for OEM and ODM projects. Changes to port structure, LEDs, or magnetics require a separately approved specification. If PoE is needed, request a suitable alternative to this non-PoE model.

What is the MOQ for JGA1T802W-G/D1/P?

Ask GLGNET to confirm the MOQ for your requested configuration and quantity. Standard-model orders and custom developments may have different purchasing conditions.

How can I verify connector quality and compatibility?

Start with the model drawing and your PCB design, then evaluate samples in the intended equipment. GLGNET can discuss relevant inspection and test requirements. Ask for the documentation applicable to the ordered configuration and your project.

How long is the production lead time?

Lead time depends on availability, order quantity, the approved configuration, and the production schedule. Share your required delivery date with GLGNET for a project-specific quotation and schedule.

RELATED PRODUCTS

×

CONTACT US

Cookie Policy

We use cookies and other tracking technologies online. Please read our Cookie Policy, which is part of this Cookie Policy , and is incorporated herein by reference.