JGA1S805-G/YP HF Halogen-Free Gigabit Connectivity in a Latch-Up Design
JGA1S805-G/YP HF Halogen-Free Gigabit Connectivity in a Latch-Up Design

JGA1S805-G/YP HF Halogen-Free Gigabit Connectivity in a Latch-Up Design

130008-02611



A single-port magnetic RJ45 connector combining Ethernet magnetics, Green/Yellow LEDs, and a shielded through-hole body. Its side-entry layout provides horizontal cable access, while the model drawing documents the material requirements for OEM review.


√ 1x1 10/100/1000BASE-T Interface

√ Integrated Ethernet Magnetics

√ Side Entry, Latch Up

√ Separate Green and Yellow LEDs

√ 25.4 × 16.2 × 13.4 mm Body

√ 0°C to +70°C Operating Range



*Send your PCB layout, material requirements, and order quantity for selection support.


JGA1S805-G/YP HF Magnetic RJ45 Connector Overview

A Single-Port Ethernet Interface with Documented Material and Mechanical Specifications

Product Overview

GLGNET JGA1S805-G/YP HF is an RJ45 with integrated magnetics for single-port Gigabit Ethernet equipment. The jack and Ethernet transformer circuitry form one assembly, reducing the need to place separate magnetic components beside the port.

This model uses a side-entry, latch-up arrangement with a 25.4 mm housing depth. The drawing supplies the mechanical views, PCB footprint, material table, and magnetic circuit needed for engineering evaluation.

01

Single-Port Gigabit Format

The 1x1 interface supports 10/100/1000BASE-T connections, providing a gigabit RJ45 connector for a single copper Ethernet port.

02

Latch-Up Cable Access

The cable enters parallel to the PCB, and the plug latch faces upward. Allow suitable access above the latch when positioning the port at the equipment panel.

03

Defined Housing Envelope

The specified 25.4 × 16.2 × 13.4 mm dimensions help engineers evaluate board-edge placement and enclosure space. Confirm the footprint against the drawing before PCB release.

04

Standard Non-PoE Configuration

The standard model is specified without PoE support or additional EMI fingers/gaskets. Its metal shield remains part of the connector construction.

Need a Customized RJ45 Connector Solution? Share your PCB footprint, panel requirements, and material specification with GLGNET to discuss the right configuration.

JGA1S805-G/YP HF Magnetic RJ45 Connector Specifications

Review the standard model's port configuration, LED arrangement, mechanical dimensions, and operating range. Use the model drawing for detailed PCB and circuit checks.

ParameterSpecificationParameterSpecification
ModelJGA1S805-G/YP HFData Rate10/100/1000BASE-T
Part Number130008-02611PoE SupportNone (Non-PoE)
Port Configuration1x1 (Single Port)LED IndicatorsGreen / Yellow
Number of RJ45 Contacts8ShieldingShielded Metal Housing
Connector TypeRJ45 with Integrated MagneticsEMI Finger / GasketNone
Connector StyleSide Entry, Latch UpLength25.4 mm
Mounting TypeThrough HoleWidth16.2 mm
Height13.4 mmOperating Temperature0°C to +70°C

Need More Technical Information?

Download the model drawing for the material table, contact-finish selection, PCB footprint, and electrical parameters. Ask GLGNET for documentation applicable to your ordered configuration.

Request Datasheet→

Quality Certification

We holds multiple international certifications, ensuring that its China RJ45 connectors and cages meet strict standards for quality, reliability, safety, and environmental compliance.Key certifications include: ISO 9001, IATF 16949, QC 080000, ROHS, REACH, UL, ELCC,etc.

IATF 16949

QC 080000

REACH

ROHS

UL

ELCC

Advantages of JGA1S805-G/YP HF Magnetic RJ45 Connector

Documented RoHS and halogen-free material requirements, integrated magnetics, separate green and yellow LEDs, and shielded through-hole construction support OEM component selection.

Documented material requirements of magnetic RJ45 connector
Documented Material Requirements
The model drawing states that all raw materials meet RoHS and halogen-free requirements. This provides a documented material specification for OEM procurement review. Ask GLGNET for the applicable material declaration for your ordered configuration.
Integrated Ethernet transformer circuitry in magnetic RJ45 connector
Integrated Ethernet Transformer Circuitry
As an RJ45 connector with transformer circuitry inside the housing, this model combines the cable interface and magnetics in one component. The magnetic circuit is shown in the drawing so engineers can compare it with the PHY interface requirements.
Separate green and yellow LED indicators on magnetic RJ45 connector
Separate Green and Yellow Indicators
One green LED and one yellow LED provide visible port-status indication options. Their link or activity functions are assigned by the equipment's LED control circuit, allowing the indicators to follow the device's interface design.
Shielded through-hole construction of magnetic RJ45 connector
Shielded Through-Hole Construction
The drawing specifies a 0.2 mm nickel-plated copper-alloy shield. Through-hole mounting provides board connections for the connector assembly. Review the shield terminals and grounding arrangement as part of the complete equipment design.
Share Your Requirements with GLGNET

Applications of JGA1S805-G/YP HF Magnetic RJ45 Connector

Evaluate this model for non-PoE Gigabit networking equipment requiring horizontal cable entry and visible port indicators. The connector's specified operating range is 0°C to +70°C.

magnetic RJ45 connector for Ethernet switches and routers

Ethernet Switches & Routers

An option for an individual copper Ethernet port where integrated magnetics and LED indication are required. The latch-up orientation allows cable access at a board-edge panel opening with suitable release clearance.

magnetic RJ45 connector for commercial gateways and network appliances

Commercial Gateways & Network Appliances

Suitable for evaluation in gateways, office network appliances, and communication terminals requiring a shielded single-port interface. Match the 25.4 mm housing depth and operating range to the equipment layout.

magnetic RJ45 connector for embedded communication boards

Embedded Communication Boards

Provides an RJ45 magjack for embedded Ethernet interfaces that use through-hole assembly. Engineers can review the drawing's footprint, signal connections, and LED pins before sample verification.

magnetic RJ45 connector for security and monitoring controllers

Security & Monitoring Controllers

Can be evaluated for data interfaces on separately powered monitoring devices and controllers operating within the specified connector range. Projects requiring Ethernet power delivery need a PoE-capable alternative.

Request a Quote

Custom RJ45 Connector

Engineering and manufacturing support covers PCB fit, magnetic circuits, LED requirements, and material documentation, from sample evaluation to OEM/ODM production planning.

Halogen-Free Gigabit Connectivity in a Latch-Up Design.webp

Customized Magnetic RJ45 Solutions from GLGNET

As an RJ45 connector manufacturer, GLGNET supports OEM projects that need a specific interface layout, magnetic circuit, or material documentation. Discuss the standard model first, then evaluate a separate configuration where the project requires changes.

01

Mechanical & Interface Customization

Review board depth, mounting holes, panel access, and shield connections with GLGNET. Any revised mechanical design is documented separately from standard part number 130008-02611.

02

Electrical & LED Engineering Support

GLGNET's engineering capabilities include signal-integrity analysis and testing. The team can discuss PHY interface, magnetics, and LED requirements, with the validation scope agreed for the project.

03

OEM & ODM Manufacturing Support

Support covers sample evaluation and volume-manufacturing planning. Confirm the approved drawing, material documentation, quantity, and delivery requirements before ordering a standard or custom configuration.

Contact GLGNET

JGA1S805-G/YP HF Magnetic RJ45 Connector FAQs

Can I request samples of JGA1S805-G/YP HF before placing a bulk order?

Yes. Contact GLGNET to discuss samples for board-fit and electrical evaluation. Quote part number 130008-02611 and specify the required quantity. Use the samples to check the footprint, latch access, LED connections, and interface performance in your equipment.

What information should I provide for a quotation?

Provide the model or part number, order quantity, application, and required delivery date. Include the PCB footprint, PHY interface, LED requirements, and any material-declaration requirements relevant to your project.

Does GLGNET support OEM and ODM customization?

Yes. GLGNET can evaluate changes to mechanical layout, magnetics, LEDs, and project-specific requirements. A custom version requires a separately approved drawing and specification. If your project needs PoE or a wider temperature range, request a suitable alternative.

What is the MOQ for JGA1S805-G/YP HF?

MOQ depends on the ordered configuration and purchasing arrangements. Share your project quantity and whether you need the standard model or a custom version so GLGNET can confirm the applicable order conditions.

How can I verify the material and quality requirements for this model?

Start with the model drawing and its material table, then request the applicable declarations and inspection documents from GLGNET. Confirm the ordered configuration, and evaluate samples against your mechanical, electrical, and project-specific acceptance requirements.

How long is the production lead time?

Lead time depends on product availability, order quantity, configuration approval, and the production schedule. Provide your target delivery date to receive a project-specific quotation and delivery estimate.

RELATED PRODUCTS

×

CONTACT US

Cookie Policy

We use cookies and other tracking technologies online. Please read our Cookie Policy, which is part of this Cookie Policy , and is incorporated herein by reference.